Product Listing

Back To The Product Listings

BMW 325is Race Car

Posted by sawguy about 2 weeks, 3 days ago
23,000.00

Chassis

  • 1995 BMW 325IS w/ 230,XXX original miles
  • Custom carbon fiber sunroof filler
  • Fiber Glass hood
  • Hood hinge L/R  ES  72858 & 9
  • Catch   OEM auto parts  51238130865
  • New Fenders Auto fit  BM3s02-96a2 (lighter then OEM)
  • Hood Pins Sparco style  Turner  hoodpin-bk
  • E36 headlight delete  S2R Tuning
  • Fiberglass doors MA Shaw
  • New Toyota Super White paint job

Engine

  • 3.2L I6 with complete OBD-I swap (including S50 better breathing intake manifold, wiring harness)
  • Runs on 91 octane
  • 24# injectors (F5DE-B5A)
  • Evosport serpentine belt pulley kit
  • Link G4+ ECU for easy tuning and programmability
  • Supersprint long tube headers pn 785501
  • Stock throttle body
  • Rebuilt cylinder head with new valves and Supertech dual springs, new pistons/rings, rod bearings, chain etc.
  • Head was pressure checked, decked a few thousandths for increased compression
  • ARP head studs
  • Shtick cams
  • Custom 3” straight stainless steel exhaust from headers back with Magnaflow muffler
  • Oil pan has welded oil pump nut and VAC motorsports baffle kit.
  • Driver side motor mount bracket   11811141137
  • Passenger side motor mount bracket  11811138249
  • Air filter element  Summit  KNN-RU-1785
  • Cooling Fan Switch BMW oe #61311364273 FAE #36020
  • AKG Poly Motor Mounts  AKG

Drivetrain

  • Stock M3 transmission, stock driveshaft, stock 3.23 & built 3.73 rear differential, stock axles
  • Aasco Motorsports 12lb Flywheel with pressure plate and disk
  • Turner adjustable short shifter setup
  • Rogue Engineering finned diff cover
  •  

Suspension

  • Road Race Specific Feal 441shocks, rear setup as coil over type custom tuned by SRD.
  • Swift Sport Spec R   Front 13K, rear 9K
  • Ground Control camber/caster plates
  • Ground Control sway bars: front sku #sbe36fr (32mm OD), rear sku #sbe36rr (26mm OD).
  • Turner rear adjustable control/camber arms #TSU9940001
  • Ground control monoball front control arm bushings offset to move front wheels closer to the front
  • Ground control monoball rear trailing arm bushings
  • Front subframe X-brace
  • Turner tranny, subframe mounts & diff bushings
  • Bolts for rear member to car  BMW parts  33332227291
  • Nut for stud for rear member to car  BMW parts  33311133463
  • Stud for rear member to car  BMW parts  33326760361
  • L/R front control arm  Raybestors  SPR5071236 & 5
  • Rear upper control arm sub frame monoball set  Turner  TSU9980006
  • Front strut tower reinforcement plates  Bimmerworld
  • Powerflex polyurethane front sway bar mounting bushings (23MM)  Bimmerworld  PFF5-310-23
  • Aluminum sub frame mount (rear)  Bimmerworld
  • Tie Rod locking plates  Bimmerworld
  • Clutch slave cly  Oreilly  CS2537

Cooling

  • Custom brake duct backing plates and routing of brake ducts (can turn wheel lock to lock)
  • Aluminum Mishimoto radiator, expansion tank, fan shroud silicone upper and lower radiator hoses
  • Electric fan
  • Metal impeller water pump and metal thermostat housing
  • Upper radiator bracket  ECS  2091419
  • Upper radiator mount  ECS  2091437
  • Drinking water in radiator & “purple Ice”

Brakes

  • Vented E46 330 front rotors and calibers.
  • Brake pads  Front Cobalt  CRB-XR2-AP21/16-16.8mm
  • Stock rear brake calipers with StopTech cryo-slotted rotors 126.34036csl & 126.34037csl Tire Rack
  • Stock Rear M3 calipers Cobalt XR2-D396-16.5mm 126.34037CSR & 126.34036CSL
  • Wilwood High temp racing brake fluid
  • Stainless steel lines all around
  • Epic Motorsports Mk60 standalone ABS
  • 3” 300 deg brake duct hose     Allstar 42151

Wheels/Tires

  • 1 set255/40-17 Nitto NT01 on 16.8 lb 17x8.5” Kosei K1 wheels
  • 1 set Hankook Ventus C51 245/40ZR17 on 16.5 lb 17x9" ET30 APEX ARC-8 Wheels
  • 1 set of OEM wheels/tires for setup
  • Hard Motorsports 78mm long Bullet Nose Studs and nuts 

Safety

  • Custom made roll cage.  Cage tried to rear frame, driver side NASCAR door bars, A-B pillars tried in.
  • Scroth 6 point harness good to 2022
  • ESS fire suppression (smaller bottle) with handle on driver side dash w/ 2 nozzles on engine and 1 on driver
  • MOMO Daytona XL seat  RC’s Garage
  • Race seat install kit  VAC  vac-rsik-e46-b-b-g
  • Sparco seat slider
  • Anti-sub mounting bar  VAC  vac-asmb
  • Lap belt mounting bracket  VAC vac-lbmbk
  • Emergency cutoff switch (kills entire car)
  • Longacre wide rear view mirror
  • Factory tow hooks on front and rear
  • Safety shift boot assembly Joes 16500-BK

Misc.

  • Amsoil Manual Transmission Fluid
  • Amsoil Severe Gear 75w-90 Differential Fluid
  • Jegs 100amp fuse block for accessories.  555-10438
  • AEM X-Series Wideband AFR  017-30-0300.
  • Hard Motorsport dash block-off panel kit  DASHBLK.E36.2
  • Hard Motorsport Polycarbonate rear quarter windows RWINDW.E36C
Contact Seller »